RS 232 To USB Reader. Drip Feeder.
This is a Portable Program Transfer Device that transfers CNC machine programs from a standard USB flash drive (Thumb Drive, Pen Drive, memory stick) to or from the CNC control through the RS232 communications port, also referred to as Drip feed DNC or Up-Loading & Down-Loading. RUN the program, COPY or SEND a notification to DNC 2 from the computer via WIFI network. Create or edit programs directly on DNC devices cut program by% or G CODE LINE Nxxxx. There are 3 rear mounted magnets of the device that make it easy to put DNC on CNC machines. PACKAGE INCLUDES 1DNC + 1 CABLE + 1 ADAPTER. NOTE: You can power the DNC DEVICE via CABLE RS232, PIN 25 = 24V .If on the 25 pin of RS232 on the CNC machine with power(24VDC) you can not use 12vdc adapter
Features of RS 232 To USB Reader. Drip Feeder.
3D program simulation | transmit DNC drip program (works in TAPE mode) | The version has a wifi connection function | Copy programs from PC to DNC 2 via wifi network,or via USB memory card | with 2-4GB internal memory, USB reader support with large capacity
Specification of RS 232 To USB Reader. Drip Feeder.
Product Details |
---|
Color | Black |
Dimensions | 0X0X0 |
Weight | 1.34 |
![Warning](https://electroeshop.com/image/catalog/warning65.png)
Warning - California Proposition 65
This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.