Qooltek St-Net Ethernet Surge Protector For 10/100/1000 Base-T Poe+ Gigabit Modem Thunder &Amp; Lighting Protection St-Rj45
Specification -Products ID:ST-RJ45
-Peak Current Normal Mode:10.0 kAmps
-Peak Current Common Mode:5.0 kAmps
-Nominal Operating Voltages:
-Line-Line(Un): 5 Volts
-Line-Line(Uc): 8 Volts
-Line-Ground: 90 Volts
-Nominal discharge currents :
-Line/Line: < 5KA (8/20s)
-Line/Ground: 10KA (8/20s)
-NM Surge Response Time (ns):
-Line/Line: < 5ns
-Line/Ground: < 100ns
-Material:
-High insulation resistance
-Cast aluminum construction
-Environmental
-Operating Environment -40-70C(-40F to +158F)
-Operating Relative Humidity 0 - 95%
-Data Line Protection:RJ45 10/100/1000 Base-T Ethernet
-Protection Modes:Line-Line, Line-Ground
-7.5 inch green ground wire
-Standard Connectors RJ-45 Female * 2
-Case Color Silver
-Outside Dimensions (W*L*H) 26*26*62 mm
-Weight 65 g
-RoHS compliant
How I installed the ST-RJ45: Once you know how it's done, it's rather easy to install this product, but a simple diagram to supplement the written
instructions would have made it much clearer.
- The cable from the DSL ISP goes into the input port of the ST-RJ45
- The cable from the modem connects to the equipment port of the ST-RJ45
- The green ground wire is connected to the ground screw of the UPS
Specification of Qooltek St-Net Ethernet Surge Protector For 10/100/1000 Base-T Poe+ Gigabit Modem Thunder &Amp; Lighting Protection St-Rj45
Product Details |
---|
Dimensions | 0.98x0.98x2.76 |
Weight | 0.17 |
Warning - California Proposition 65
This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.