DSD TECH HC-06 Wireless Bluetooth Serial Transceiver Support Module Slave and Master Mode for Arduino + 4PIN Dupont Cable
US Delivery Time: 3-5 Business Days.
Product Description
DSD TECH HC-06 Wireless Bluetooth Serial Transceiver Support Module Slave and Master Mode for Arduino + 4PIN Dupont Cable
Bluetooth Module Features: 1,Core module uses HC-06, leads from the module interface includes VCC, GND, TXD, RXD, reserve LED status output pin, the microcontroller can be judged by the foot state Bluetooth has connected KEY pin slave invalid. 2, Led indicate Bluetooth connection status, flashing Bluetooth connectivity, lit the Bluetooth connection and open a port Backplane 3, 3.3V LDO input voltage 3.6 ~ 6V, current is about 30mA unpaired, paired about 10mA, the input voltage to prohibit more than 7V! 4, The interface level 3.3V, can be directly connected the various SCM (51, AVR, PIC, ARM, MSP430, etc.), the 5V MCU also can be connected directly, without MAX232 can not go through the MAX232 5, Open to the effective distance of 10 meters, over 10 meters is also possible, but not of this the quality of the connection of the distance do to ensure 6, After the pair when full-duplex serial port to use, do not need to know anything about the Bluetooth protocol, but only supports 8 data bits, 1 stop bit, no parity communication format, which is the most commonly used communication format does not support other formats . 7, Support for Bluetooth connection is not established by the AT command set the baud rate, name, passkey, set parameters are saved after. Bluetooth connection is automatically switched to the pass-through mode 8, Compact (1.1 x 0.1 x 0.6 inches), the factory chip production to ensure the placement quality. And sets of transparent heat shrink tubing, dust and beautiful, and anti-static. 9, The link from the machine, computer, Bluetooth with Bluetooth function from the function with a variety of hosts, the majority with a Bluetooth- enabled cell phone, PDA, PSP and other intelligent terminal pairing from not pairing between the machine.Features of DSD TECH HC-06 Wireless Bluetooth Serial Transceiver Support Module Slave and Master Mode for Arduino + 4PIN Dupont Cable
Industrial serial port bluetooth, Drop-in replacement for wired serial connections, transparent usage. You can use it simply for a serial port replacement to establish connection between MCU and GPS, PC to your embedded project and etc. Computer and peripheral devices Running in slave role: Pair with BT dongle and master module. Please note: iOS devices (iPhone) are not supported Allows your device to both send or receive the TTL data via Bluetooth technology without connecting a serial cable to your computer. Default serail port setting : 9600 1 Pairing code : 1234 Module working voltage 3.3V to 6VSpecification of DSD TECH HC-06 Wireless Bluetooth Serial Transceiver Support Module Slave and Master Mode for Arduino + 4PIN Dupont Cable
| Product Details | |
|---|---|
| Dimensions | 1.10X0.59x0.12 |
| Weight | 0.03 |
Product FAQs
Q: What is the default serial port setting for the DSD TECH HC-06 Bluetooth module?
Ans: The default serial port setting is 9600 baud rate.
Q: Can the DSD TECH HC-06 Bluetooth module be used with iOS devices?
Ans: No, iOS devices (iPhone) are not supported by this Bluetooth module.
Q: What is the working voltage range for the DSD TECH HC-06 Bluetooth module?
Ans: The module works with a voltage range of 3.3V to 6V.
Q: What is the effective distance for Bluetooth connection with the DSD TECH HC-06 module?
Ans: The effective distance is 10 meters, but connections over 10 meters are also possible.
Q: What communication format does the DSD TECH HC-06 Bluetooth module support?
Ans: The module supports 8 data bits, 1 stop bit, and no parity communication format.
Warning - California Proposition 65 This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.