ATEN 2-Port 350 MHz VGA Video Splitter VS92A (Silver)
US Delivery Time: 3-5 Business Days.
Product Description
ATEN 2-Port 350 MHz VGA Video Splitter VS92A (Silver)
The Video Separator is a signal booster and splitter that is used to take video input from a single source and direct it to two video outputs for monitors using analog signals. The signal boost obtained by using the VS92A allows you to not only split the signal but to extend the distance so that you can send the signal to about 210 feet. (Your average VGA card, combined with a standard VGA cable, can send a clear VGA signal approximately 25 feet.) This makes public broadcasts from a single computer very feasible. If you want to display the same information on many monitors at once, such as in a classroom environment, or at a demonstration, this product performs incredibly well. Bandwidth is the term that is used to describe the signal capacity of these units. In general, bandwidth is directly proportional to the amount of data transmitted per unit of time. Specifically, in analog signals, bandwidth is the difference between the highest-frequency and the lowest frequency components of a givin signal. For example a voice telephone signal has a bandwidth of 3000 Hz (or 3000 cycles per second), where an analog TV signal has a bandwidth of approximately 6MHz (or 6 million cycles per second) which is approximately 2000 times greater than a simple voice phone call. VS92A has a bandwidth of 350MHz (which is 350 million cycles per second) and that over 40 times greater than a simple TV signal. This huge bandwidth allows for the transmission of large amounts of information at a very high rate of speed, and thus you can use the very high resolution setting of 1920 x 1440 in 24 or 32 bit true color mode. Package Content: 1 x VS92A Video Splitter; 1 x Power Adapter; 1 x User ManualFeatures of ATEN 2-Port 350 MHz VGA Video Splitter VS92A (Silver)
Maximum video resolution- up to 1920 x 1440@60Hz One video input to 2 video outputs Supports 350 MHz bandwidth Cascadable to 3 levels - provides up to 8 video signals Supports VGA, XGA, SVGA, UXGA,WUXGA and multisync monitorsSpecification of ATEN 2-Port 350 MHz VGA Video Splitter VS92A (Silver)
| Product Details | |
|---|---|
| Size | 2-Port |
| Dimensions | 4.02X2.01x5.00 |
| Weight | 0.93 |
Product FAQs
Q: What is the maximum video resolution supported by the ATEN 2-Port 350 MHz VGA Video Splitter VS92A?
Ans: The maximum video resolution supported is up to 1920 x 1440@60Hz.
Q: How many video outputs does the VS92A have?
Ans: The VS92A has one video input and can split the signal to two video outputs.
Q: What is the bandwidth of the ATEN 2-Port 350 MHz VGA Video Splitter VS92A?
Ans: The VS92A has a bandwidth of 350 MHz, allowing for high-speed transmission of large amounts of information.
Q: Can the VS92A be cascaded to multiple levels?
Ans: Yes, the VS92A can be cascaded to 3 levels, providing up to 8 video signals.
Q: What type of monitors does the VS92A support?
Ans: The VS92A supports VGA, XGA, SVGA, UXGA, WUXGA, and multisync monitors.
Warning - California Proposition 65 This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.