ANVISION 4-Pack Active 48V to 12V PoE Splitter Adapter, Plug 55mm x 25mm, IEEE 8023af compliant 10100Mbps
US Delivery Time: 3-5 Business Days.
Product Description
ANVISION 4-Pack Active 48V to 12V PoE Splitter Adapter, Plug 55mm x 25mm, IEEE 8023af compliant 10100Mbps
The Active PoE Splitter splits a PoE signal into an 12VDc power and 10100Mbps ethernet data source This device allows you to run ethernet cables from a PoE Switch over long distance, and then split the PoE signal into a separate data signal and 12Vdc power sources in order to run an non-PoE devices Specifications: Input: 44-56VDc max Shielded RJ-45 female Output: 12VDc 12A Max 154W RJ-45 maleDc connector: 55*25mm Length of Dc power cable: 19cm Operating Ambient Temperature: -10 to 45 Regulatory IEEE 8023af What is included 4 x Active 12v PoE splitterFeatures of ANVISION 4-Pack Active 48V to 12V PoE Splitter Adapter, Plug 55mm x 25mm, IEEE 8023af compliant 10100Mbps
Input Voltage: Dc 44-56V Output Power: Dc 12V 154W Max Full IEEE 8023af compliant Data Rate: 10100Mbps, Dc Jack: 55mm x 25mm Available with IP camera, Voip phone, AP and other 12V Non-PoE devicesSpecification of ANVISION 4-Pack Active 48V to 12V PoE Splitter Adapter, Plug 55mm x 25mm, IEEE 8023af compliant 10100Mbps
| Product Details | |
|---|---|
| Dimensions | 2.69X1.96X1.36 |
| Weight | 1 |
Product FAQs
Q: What is the input voltage range for the ANVISION 4-Pack Active 48V to 12V PoE Splitter Adapter?
Ans: The input voltage range for this PoE splitter adapter is 44-56Vdc.
Q: What is the maximum output power of the ANVISION PoE Splitter Adapter?
Ans: The maximum output power of this PoE splitter adapter is 154W at 12Vdc.
Q: Is the ANVISION PoE Splitter IEEE 802.3af compliant?
Ans: Yes, this PoE splitter adapter is fully IEEE 802.3af compliant.
Q: What type of devices can be connected to the ANVISION PoE Splitter Adapter?
Ans: This PoE splitter adapter is suitable for connecting IP cameras, VoIP phones, APs, and other 12V non-PoE devices.
Q: What are the dimensions and weight of the ANVISION PoE Splitter Adapter?
Ans: The dimensions of the PoE splitter adapter are 2.69 x 1.96 x 1.36 inches, and it weighs 1 pound.
Warning - California Proposition 65 This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.