Nulsom Inc. Ultra Compact Rs232 To Ttl Converter With Male Db9 (3.3V To 5V)

This adapter helps to convert TTL (Transistor-Transistor Logic) level signals to RS-232 interface. This converter has a Male DB9 connector.
Suitable for use with most microcontrollers, 300 to 115,200 bps (up to 230,400 bps). [ Please consider NS-TRS232-02 (ASIN: B074BMLM11) for High-speed RS232 communication (up to 1Mbps) ]
Compatible with Arduino, Raspberry Pi, and any micro controller, such as PIC, Atmel, STM or other system with TTL serial communications.
Operate with 3V to 5.5V power supply. You can use this on both your 3.3V and 5V projects. [ For 1.8V projects please consider NS-TRS232-02 (ASIN: B074BMLM11). ]
Perfect for any RS232 to TTL electronic projects.
The operating temperature range: -40C to +85C

NS-RS232-02 (Male Type)
RTS (Board) > T2IN (SP3232EEY) T2OUT > Pin 7 (Male DB-9 connector)
CTS (Board) < R2OUT (SP3232EEY) R2IN < Pin 8 (Male DB-9 connector)

Please disconnect this module while uploading as this is shared with Arduino's digital pins 0 and 1 for the serial communication.
This can be connected and used after the sketch code has been uploaded.

Features of Nulsom Inc. Ultra Compact Rs232 To Ttl Converter With Male Db9 (3.3V To 5V)

Ultra compact board size:15 x 14 mm, FCC Certified

Male DB9 Connector (RS232)

Supports 3V to 5.5V power supply (***The Rx/Tx logic level is equal to the Vcc-supply.*** Vcc: 3.3V -> Rx/Tx High Logic Level: 3.3V. Vcc: 5V -> Rx/Tx: 5V )

Includes SP3232E [ Please consider NS-TRS232-02 (ASIN: B074BMLM11) for 1.8V or High-speed RS232 communication (up to 1Mbps) ]

4 pin through hole: VCC, GND, Logic out (TX), Logic In (RX) and 2 pin through hole: CTS, RTS

Specification of Nulsom Inc. Ultra Compact Rs232 To Ttl Converter With Male Db9 (3.3V To 5V)

Product Details
Color	Blue
Dimensions	0.59x0.55x0.12
Weight	0.01