Leviton Vizia RF + Z-Wave Split Duplex Receptacle, White/Ivory/Light Almond
Plug In Any Device For Z-Wave On/Off Control
Enable Z-Wave remote On/Off control for any plug-in device, anytime, by plugging it into the Leviton Vizia RF + Z-Wave Split Duplex Receptacle. This surge-protected receptacle can replace a traditional duplex power outlet (where neutral wire is present) to provide both local (i.e. lamp switch) and Z-Wave control for one plug-in device. One outlet is Z-Wave controlled and the other is "always on" like a standard outlet.
- One Z-Wave controlled outlet, one "always on" outlet
- Compatible with On/Off scene and zone control
- Green locator LED illuminates when Z-Wave load is On
- Supports two-way status communication
- Optionally compatible with the Samsung SmartThings Automation Hub
Available Colors: White faceplate installed. Light Almond and Ivory color change kits included.
The Z-Wave controlled outlet responds to commands sent from Leviton Vizia RF + Controllers or other Z-Wave compatible controllers or programmers. Controlled devices can react through scene commands individually or as part of a scene or zone grouping of lights to provide an elegant and convenient "one-touch" lighting experience.
An LED locator illuminates when the load is On. In case you're installing the receptacle in a bedroom, for example, where LED lights could be disruptive, you can choose to turn the LED off.
- Split Duplex Receptacle
- Color Change Kits
Note: Wallplate not included. Compatible with Decora Plus screwless and Decora standard wallplates.
Compatible with Leviton Security & Automation Omni Controllers: Requires Leviton Serial Interface Module (VRC0P-1LW).
Compatible with SmartThings Hubs.
Compatible with Staples Connect Automation Hubs.
Write a reviewYour Name:
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: