SSK Aluminum USB 3.1 to M.2 NGFF SSD Enclosure Adapter, External SATA Based M.2 Solid State Hard Drive Enclosure (SATA Based)
Product name: M.2/NGFF SSD Enclosure
Interface type: M.2/NGFF to USB 3.1 Gen 1
Transfer Rate : Up to 5Gbps
Case Size: 115*39*11mm
Material: Aluminum alloy
Cable Type : USB3.0 AM to Type-C M
Cable Length: 60CM
Support SSD Drivers Size: SATA-based M.2/NGFF(B Key;B+M Key) SSD 2242 2260 2280mm
1. USB 3.1 Type-C super fast and high-capacity data transfer solution, Data transfer rate up to 5Gbps for USB 3.1 Gen 1;
2. Supports SATA-based M.2/NGFF(B Key ; B+M key) SSD;
3. Easy installation ; no driver required, No additional power required;
4. Supports Plug ; Play and Hot-Swapping;
5. Multi OS Supported, like Windows, Mac OS ; Linux etc.
1 x M.2 NGFF SSD to USB 3.1 Type-C SSD Enclosure
1 x USB 3.0 AM to Type-C M Cable
1 x Screw set
Please note that it supports SATA-based B Key (B ; M Key) SSD only. It does NOT support PCI-E based B key any M key SSD;
We tested our enclosure with SATA SSD, the actual speed can reach to 400MB/s~450MB/s on R/W both side.
For the brand new SSD drive, it may not be found, because the brand new SSD drive should be formatted before the first time using. And also need to make the SSD drive partition.
Follow step is to find the brand new ssd drive:
1. Use your mouse right key to click "Computer", it will show a drop-down menu;
2. Use your mouse left key to click "Computer Managment";
3. Use your mouse left key to click "Disk Management.
4. After find the brand new ssd drive, please format it, and made partition. Then you can find the drive normally.
Write a reviewYour Name:
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: