This is the solution for laptop users who also like to use their laptop in the office, but don't like the hassle of connecting each device every time. With this station, connect all peripherals to the docking station, then use the included cable to connect the laptop to the dock. All your peripherals are now connected, with just one cable! This lets you come and go as you please without the hassle of repeatedly connecting and reconnecting devices to your laptop. This station contains a 3-port USB 2.0 hub, one serial DB9 port, one parallel printer port, one 10/100 RJ45 ethernet port, PS/2 mouse and keyboard ports, and a VGA pass-through port - all in just one unit! Connect your monitor, mouse, keyboard, printer, network, modem, and any USB 2.0 devices to the docking station for a convenient all-in-one connectivity solution. This docking station eliminates the clutter of cables connecting to your computer as it requires only a single VGA/USB combo cable. Additional USB hubs can be attached to allow you to daisy-chain up to 127 devices. Plug-and-play functionality eliminates the need to reboot during installation. This simple station makes desktop use of your laptop amazingly simple, convenient and, most importantly, inexpensive. This dock is designed as a “universal” docking station. Due to the differing power requirements of different makes and models of laptop, providing power to the laptop is not a feature of our docking station. Our dock is designed to add an Ethernet port, a 9-pin Serial port, a 25-pin Parallel printer port, 2 PS/2 ports, a 3 port USB hub, and a VGA monitor pass through. Input: One DB9 RS-232 Serial Female, One DB25 Parallel Male (for IEEE-1284 bidirectional printers), Two PS/2 Female (for keyboard and mouse), One RJ45 Female, and One HD15 Male Output: Three USB Type A Female and One HD15 Female; The DB9 RS-232 serial connector supports baud rates from 1.2k to 115.2k; Complies with IEEE802.3u 100Base-TX and with IEEE802.3 10Base-T standards
- Use your laptop as your desktop, and only use one cable! An economical alternative to expensive proprietary docking stations.
- The DB9 RS-232 serial connector supports baud rates from 1.2k to 115.2k.
- Complies with IEEE802.3u 100Base-TX and with IEEE802.3 10Base-T standards-Approvals: FCC and CE
- Supports Windows (98SE/ME/2000/XP/Vista)
- Minimum available RAM of 16 MB
Write a reviewYour Name:
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: