Fiber Patch Cable - Lc To Lc Om3 10Gb/Gigabit Multi-Mode Duplex 50/125 Lszh Fiber Optic Cord For Sfp Transceiver, Computer Fiber Networks And Fiber Test Equipment, 1-Meter(3.3Ft)
10Gtek LC-LC Fiber Patch Cord, OM3 Multi-mode Duplex, LSZH, 1-Meter(3.3ft)
10 Gigabit Performance for Critical Connections
These fiber cords are OM3 rated for the extreme demands of SAN networks. They are precision factory tested for insertion and return loss to ensure transmission performance per TIA-568-C.3 specifications. The combination of LC connectors in a protective yoke, strain relief boots and zirconia ceramic ferrules provides a dependable, low-loss performance.
Bend Insensitive Engineering
BEND INSENSITIVE DESIGN allows for a 7.5mm bending radius that is 4X more flexible than standard 50 micron fiber cables. Bend insensitive multimode fiber (BIMMF) provides greater flexibility in tight spaces or long cable runs with multiple bends.
OM3 classification rating operates with Gigabit Ethernet 1000Base-SX, or 10GBase-SR/LRM, and Fibre Channel 100/200/400/1200-MX; Backwards compatible with FDDI, and Fast Ethernet 10/100BASE SX or FX.
- Connectors: LC to LC
- Core: 50 um
- Cladding: 125 um
- Jacket: LSZH
- OD: 2.0mm
- Classification: OM3
- Wavelengths: 850 and 1300nm
- Type: Bend-Insensitive Multimode (BIMMF)
- Ferrule Material: Ceramic
- Polish: PC
- Compliance: TIA 568-C.3 / 604-10 / 492AAAC, UL 910, C E, RoHS
Limited 5-Year Warranty
- LC-LC, OM3 Multi-Mode Fiber(MMF), Duplex, 1-meter in length, 1 PACK
- OM3 Fiber compatible with Gigabit Ethernet 1000Base-SX, or 10GBase-SR/LRM, and Fibre Channel 100/200/400/1200-MX; Backwards compatible with FDDI, and Fast Ethernet 10/100BASE SX or FX.For example,10Gtek for Cisco SFP-10G-SR, 10Gtek for Ubiquiti 10Gb SFP+, 10Gtek for Intel E10GSFPSR 10Gb, 10Gtek for Netgear AMX761, 10Gtek for Cisco GLC-SX/MMD/ GLC-SX/MM/ SFP-GE-S, 10Gtek for Mellanox MFM1T02A-SR.
- 7.5mm Minimum Bend Diameter that is 4X more flexible than standard 50 micron fiber cables without introducing any macro-bending loss; Ideal for SAN network cabinets that require 20 or more bends in the cabinet or high density installations with cables crammed into an extremely small footprint; Bend insensitive multimode fiber (BIMMF) is interoperable with standard OM3 cabling systems
- High-Quality:PVC Jacket,LSZH,durable for indoor use.
Low Loss:Insertion loss(dB)≤0.3,Return loss(dB)≥30
- The 50/125 μm OM3 multimode fiber patch cable is TIA 568-C.3 / 604-10 / 492AAAC, UL 910, C E, RoHS compliant.5-Year warranty, free replacement and unconditional 90-day full refund guarantee. 10Gtek offer more length and connector options, if your needs not listed above, pls contact us and we will reply you within 24 hours.
Write a reviewYour Name:
Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below: