Dayton Audio Daex19Ct-4 Coin Type 19Mm Vented Exciter 5W 4 Ohm

Quick Overview Take your product or project to the next level by turning into a speaker! The DAEX19CT-4 sound exciter, by Dayton Audio, features voice coil vent holes for higher power handling. Product Highlights Small size; just under 1-1/2 diameter, about 3/8 high Pre-applied 3M?HB?dhesive for quick, durable installation Rare-earth neodymium motor with cooling vents for higher power handling 4 ohms impedance for use with small, Class D amplifiers Strategically-placed vent holes cool this exciters voice coil for higher power handling Product Manuals / Spec Sheets / Downloads Dayton Audio DAEX19CT-4 Specification Sheet AddThis Sharing Buttons Share to FacebookFacebook Share to TwitterTwitter Share to MoreAddThis Product Description Dayton Audios 19 mm DAEX19CT-4 coin type exciter features the same ability to turn nearly any surface into a speaker, as other exciters and tactile transducers, only in a more compact package for working with smaller surfaces. This exciters small size enables audio reproduction in places never imagined: toys, monitors, cabinet doors... even windows! A neodymium magnet is employed to create maximum magnetic flux around the proprietary voice coil for increased sensitivity when compared to similar sized exciters. In turn, this reduces power requirements and makes it possible to use very small audio amplifiers, without sacrificing total output. Cooling holes placed strategically on this exciters housing allows for higher power handling, for applications where more output is desired, while maintaining a small form factor. To ensure maximum acoustic energy transfer between the transducer and the surface to which it is attached, 3M VHB (Very High Bond) adhesive is pre-applied... just peel and stick! Two PCB solder points keep installation and wiring as compact as possible. Note: An exciters frequency response and sensitivity are completely dependent on the exciters designated surface. Thinner, smaller materials will tend to be louder and create a mid/tweeter response. Thicker, larger materials (with multiple exciters) will be slightly quieter but result in a more full-range sound. Adhesive dimensions: 21.5 mm (outside diameter) 21.75 mm (inside diameter) To understand more about exciter technology, here is a link to the Exciters Buyers Guide . Product Details Speaker Series Exciters Model Number DAEX19CT-4 List Price $7.99 Color Silver Unit of Measure Each UPC 848791000966 Warranty - Parts 5 Years Warranty - Labor 5 Years Product Shipping Weight (lbs.) 0.05 Speaker Type Exciter Power Handling (RMS) 5 watts Power Handling (max) -- Continuous Program Power -- Impedance 4 ohms Sensitivity -- Frequency Response -- Voice Coil Diameter 19 mm Magnet Weight -- DC Resistance (Re) 3.8 ohms Voice Coil Inductance (Le) 0.04 mH 1 kHz Resonant Frequency (Fs) 637 Hz Mechanical Q (Qms) -- Electromagnetic Q (Qes) -- Total Q (Qts) 2.34 Diaphragm Mass Inc. Airload (Mms) 0.58 g Moving Mass Of Diaphragm (Mmd) -- Mechanical Compliance of Suspension (Cms) 0.0001 mm/N Surface Area Of Cone (Sd) -- Volume of Displacement (Vd) -- BL Product (BL) 1.78 Tm Compliance Equivalent Volume (Vas) -- Maximum Linear Excursion (Xmax) -- Drivers Mechanical Losses (Rms) -- Entry / Exit Diameter -- Surround Material -- Voice Coil Wire Material -- Voice Coil Former -- Basket/Frame Material -- Magnet Material -- Overall Outside Diameter 33 mm dia. Overall Depth 13 mm Baffle Cutout Diameter -- Mounting Hole Diameter -- Bolt Circle Diameter -- Product Weight --

Features of Dayton Audio Daex19Ct-4 Coin Type 19Mm Vented Exciter 5W 4 Ohm

Small size; just under 1-1/2 diameter, about 1/2 high

Pre-applied 3M?HB?dhesive for quick, durable installation

Rare-earth neodymium motor with cooling vents for higher power handling

4-ohm impedance for use with small, Class D amplifiers

Strategically-placed vent holes cool this exciter's voice coil for higher power handling

Specification of Dayton Audio Daex19Ct-4 Coin Type 19Mm Vented Exciter 5W 4 Ohm

Product Details
Color	Silver
Weight	0.05